DANDTON Report post Posted December 19, 2014 (edited) Lots of people asked me how to sharp the cutting knife, let me show you a simple tutorial, I think it will be helpful. Keep your knife sharp any time, that will give you a good mood. Step1: Prepare two sknife stone, one is 1000# and the other one is 1500# or higher, Put the stone into basin full of water, dip them 5 mins. Edited December 19, 2014 by DANDTON Quote Share this post Link to post Share on other sites
DANDTON Report post Posted December 19, 2014 Step 2: Make sure the blade attach the 1000# knife stone firmly and grind it back and forward, make sure your hand won't shake during this time, grind it about 50 times, you will see the blade curl to the opposite side. Quote Share this post Link to post Share on other sites
DANDTON Report post Posted December 19, 2014 Step 3: this is a trouble step, use 1500# stone to repair the curled part, also polish the blade. Draw only from the top to then end 5 times, and then turn back draw ONLY 1 time. Do it looooots of times, until you can't see the curl part. Do take care: You must only Draw not grind it back and forward, it is very important. And do remember 5 times for the oblique side and 1 time for the straight side. Step 4: After step 3, your knife will be very sharp, but it is not shining, want it shining right? Go on. Paint grinding paste on the flesh side of a piece of leather, and then repeat Step 3---- 5 times for oblique side and 1 time for straight side, do it sometimes as your wish. Quote Share this post Link to post Share on other sites
DANDTON Report post Posted December 19, 2014 Time to finish, test it, sharp right? Quote Share this post Link to post Share on other sites
Wild Bill46 Report post Posted December 19, 2014 DANDTON ---------------------- Thanx for the tutorial man, I'm sure there are those who will draw from it. myself included !. ------------- Wild Bill46 Quote Share this post Link to post Share on other sites
