Members GlennR Posted December 24, 2014 Members Report Posted December 24, 2014 I made a couple hip quivers for Christmas gifts, basically my first quivers. The first had some issues, and I learned a few things, so the second came out better. I took about 3/4" off the width, changed the way the top fastened to the body from tabs with snaps to slots with rivetted straps (and then went and redid the first), and cut the profile of the top of the quiver a little lower. The edges of the second are a lot straighter (used a straight edge) and the leather is 6/7 oz as opposed to the first which is 7/8 oz. For the second quiver the holes on the back match the holes on the front, the first I would call only serviceable. Quote
Members Bigfoot Posted February 5, 2015 Members Report Posted February 5, 2015 Looks like a good job to me ....I'm sure whoever received em would have been happy.... keep it up and it'll should get easier. Quote
Members GlennR Posted February 5, 2015 Author Members Report Posted February 5, 2015 Thank you. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.