Jump to content

Recommended Posts

  • Members
Posted

I can imagine your excitement in bringing home your new to you machine. I have one just like it and it works wonderful. I can't see in any pictures, but my guess is that the arm to lift the foot is still on the machine. I would keep everything as is for awhile, and forget the knee lift. I use the arm almost always and the woman I bought the machine from used it always, knee lift wasn't even mounted when I bought it. I'll bet that power lift will come in handy later tho. My good friend has a upholstery shop and he says these machines were made in Germany with excellant life expectancy. Mine came from a car upholstery shop and was used every day and for long periods of time, after years of service, she went to the new Consew because this Pfaff would not make the long stitch she wanted for car seats, it seems she wanted 3 or 4 stitches per inch. Ours won't make them that long. You mentioned speed seems fast, I am wondering if you have the 3450 rpm motor. One of my machines has that and that machine "flys" wide open, and it is hard to slip the clutch. Lots of operators do slip the clutch and far as I know, doesn't hurt them at all. Speaking of fast, when I bought my first Pfaff, he said it would sew two yard sticks together in 3-4 seconds! By the pictures, you are blessed with welt foots. One picture shows a double one, used on furniture, you wrap your material around the cord, and run it through the channel, sewing right along the cord and does so effortlessly. In some applications, they will make a double welt and staple in on right between the two welts. I notice the paint is still good on the bed, meaning not too much material has ben sewed with it. Much of the paint on mine was wore off from material passing over the bed and rubbing the end where you set your stitch length. I 've probably talked too much, but lookes like you made a good buy. Earl

  • Members
Posted

Earl

Thanks for replying. I think I will leave it alone for now. I looked at the motor and it's a 1/2 horse and the rpm is 1725. But it sure looks fast to me. I guess that shows my inexperience with sewing machines.

Mike

Posted

Looks great! Dump the clutch motor and get a servo motor. Artisan has several models that will serve you well at a good price. Unless you are doing high speed production sewing that clutch motor will only be a hinderance. Getting stitch by stitch speed control with the servo will pay big dividends. I promise you that!! My Juki 1541S is the same class machine as your Pfaff. Adding the servo motor was the best thing that I ever did.

:red_bandana::red_bandana::red_bandana:

Ride Safe!

Bree

2003 Dyna Wide Glide

Memberships:

Iron Butt Association, Niagara Falls HOG, Wild Fire HOG

NRA, Niagara County Sportsman's Association

  • Members
Posted

Thanks Bree

I think your right about adding the servo. But unfortunately for now I'll have to learn on this speed demon. And then change to the servo when I get some more cash.

Mike

Posted
Thanks Bree

I think your right about adding the servo. But unfortunately for now I'll have to learn on this speed demon. And then change to the servo when I get some more cash.

Mike

LOL! I used to grab hold of the flywheel and muscle the machine to do what I wanted it to do. Of course if I got heavy footed there was no way that I could hold back that clutch motor!! So it is a balancing act. You can loosen the tension on the belt just a smidge to make it easier to slip the belt which allows you more control but less power.

:red_bandana::red_bandana::red_bandana:

Ride Safe!

Bree

2003 Dyna Wide Glide

Memberships:

Iron Butt Association, Niagara Falls HOG, Wild Fire HOG

NRA, Niagara County Sportsman's Association

  • Members
Posted

Bree

I'll have to try loosening the belt. I really wont need alot of power right off.

Mike

  • Members
Posted (edited)

Hi,

Bree's idea of a servo motor is really good, and in the long run, would solve your problem. However, I only use industrial clutch motors, like yours, and I can sew very slowly with them, even down to one stitch at a time; all you need is a bit of practice. Make sure that there isn't too much 'play' in the link between the foot pedal and the motor clutch arm and you will be surprised as to how slowly you will be able to sew!

Steve

Edited by SteveBrambley
  • Members
Posted
Howdy to all!!I'm pretty excited I got the Pfaff picked up and can't wait to use it. The seller couldn't find the manual so I'm trying to track one down on the net. Meanwhile I have a few questions( go figure) What I'm wanting to start out sewing is some hair on stuff. The question is what size of thread should a fella use for that and what size of thread should I use for headstalls (3/16th to 1/4"thick) not sure of ounces. I reckon that when I order the thread they can tell me what size needles I need. Next question is it came with some feet can someone tell me what they are used for and will they work for what I want to do. Next question on top of the machine there are holes with red around them I reckon those get oil but how much oil and how often. And do ya have to use Pfaff oil and grease or will singer or other brands work. More questions there is a thingymbob on the side of the machine that looks like ya hook a air source to what is it and do ya have to use it. The foot looks like it lift up about 3/4" so will it so that much. This thing hasn't been ran in a year or a little better is there some stuff I need to do before I run the heck out of it (couple hrs aweek). Sorry for all the questions but this thing runs scary fast. So I want to make sure I do what I need to do so I don't break it or hurt myself!! Thanks for all the help that can be offered in helping me learn this machine. I'll have to add more pics.MikeIMG_1003.JPGIMG_1000.JPG[attachme

t=17131:MG_1006.JPG]IMG_1004.JPG

I am not sure if you know this...but it is a pfaff 1245...I know because I have the same machine...if you have any parts that you will not use and wish to sell...let me know. You can get the users guide, repair guide and adjustment book by doing a google search for "free pfaff downloads" and putting in the model # 1245...you can get everything you need free !artie in miami...newbie...this is my first post
I am not sure if you know this...but it is a pfaff 1245...I know because I have the same machine...if you have any parts that you will not use and wish to sell...let me know. You can get the users guide, repair guide and adjustment book by doing a google search for "free pfaff downloads" and putting in the model # 1245...you can get everything you need free !artie in miami...newbie...this is my first post
ps...try ebay for the foot lift lever assembly...when you download the parts book for the 1245, you can see what you need
  • Members
Posted

SteveBramley

That's nice to know. I read on here somewhere about putting a tennis ball under the treadle to give more control I'll have to give it whirl. It would be nice to have the servo. Maybe after I start making a little money doing this. Until then as my daddy says poor people have poor ways!!

arteinmiami

(wow long name) Thanks for your reply and info!! I'm not to sure what all I'm going to be doing as of yet. But if I figure it out and don't need some stuff I'll keep ya in mind. And a GREAT BIG WELCOME to a dang great site.

Mike

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...