Members Chayne Posted January 6, 2015 Members Report Posted January 6, 2015 (edited) Anyone have any info on this 127W1? thread,needles so on Edited January 6, 2015 by Chayne Quote
Moderator Wizcrafts Posted January 6, 2015 Moderator Report Posted January 6, 2015 I've never seen a 127 machine before. But, it has the basic appearance of a short arm upper and needle feed machine I used to own. It took up to #69 bonded thread and sewed about 1/4 inch or leather. Good luck with your restoration project. Parts are likely to not be available, unless you find another similar machine for parts. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Chayne Posted January 6, 2015 Author Members Report Posted January 6, 2015 Ouch! No way to get a bigger thread on it huh? The research I've done says 138 with size 20-22 needle 134x1 There's a 127 and a 127w which they go up to 127w99 There's a 127 and a 127w which they go up to 127w99 There's a 127 and a 127w which they go up to 127w99 Quote
Members Chayne Posted January 6, 2015 Author Members Report Posted January 6, 2015 Also states all classes except for WSC whatever that means WSV SORRY Quote
Moderator Wizcrafts Posted January 6, 2015 Moderator Report Posted January 6, 2015 If that is true, it can sew with #92 thread, maybe up to #105. You should use a #23 leather point needle with #138 thread, top and bottom. Bob Kovar at Toledo Industrial Sewing Machines and Gregg at Keystone sewing are the ones to ask about ancient Singer sewing machines. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Chayne Posted January 6, 2015 Author Members Report Posted January 6, 2015 Lol bob never heard of the machine I already tried.. I was hoping it would see 277 if any way possible Lol bob never heard of the machine I already tried.. I was hoping it would see 277 if any way possible Quote
CowboyBob Posted January 6, 2015 Report Posted January 6, 2015 Ok,now I've seen a pic & have to tell you with that type of hook & bobbin case it is a light duty machine.You will probably be able to use #69 & maybe #92 but that would be it. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Members machinehead Posted January 6, 2015 Members Report Posted January 6, 2015 Congrats on an interesting find. I enjoy seeing these old dinosaurs still stitching. Hopefully you will get it sewing like a champ and with a little practice you may really enjoy treadling the beast. Even though it probably takes only 92 thread at best, as a cylinder arm it may become a valuable go to machine in your work. Maybe kinda like a patch machine... you might not use it often, but for certain things its there. Sometimes when you already have the machine your work changes course a bit to incorporate its use. Quote
Members Gump Posted January 6, 2015 Members Report Posted January 6, 2015 Its definitely a rare machine, as ISMACs does not have any listing on it. You might want to contact them as they have the best info on Singers that I have come across, and they would probably be glad to have a pic and any info they could get. Gump. Quote
Members Chayne Posted January 6, 2015 Author Members Report Posted January 6, 2015 Thanks y'all even though its not what I wanted to hear. Hey Bob think I can push to 138? For the price I purchased it for I don't believe I'll be at a loss considering its all there even the spool holder and doesn't look bad. If I can't push it to at leat 138 I'll fix the bugs and whatever I can and just sell it. Quote
Members Chayne Posted January 6, 2015 Author Members Report Posted January 6, 2015 Sorry my mistake 92 at best huh? Hmm well I did see a pick of it sewing hatbands in and I do make hats so we'll soon see. Yes Gump I was planning on giving all info and what I've learned from it from tinckering with it to pass it on. The machines went from 127w1-127w99. Machine head I rebuilt a 29-4 with cowboybobs help so I am familiar with these guys but I could a swore if I did 138 on a a 29-4 that this machine would do the same if not better Quote
Members Chayne Posted January 6, 2015 Author Members Report Posted January 6, 2015 A heads up! Its just a paper weight . Just so happens they don't make leather needles for it any longer. Quote
Members C3PO Posted May 8, 2018 Members Report Posted May 8, 2018 Hi Chayne, I recently started fixing up a 127w2, and I'm looking for few parts. From my understanding the w1 and w2 are quite similar. Any chance you'd be willing to part with the paperweight? Quote
Moderator Wizcrafts Posted May 8, 2018 Moderator Report Posted May 8, 2018 1 hour ago, C3PO said: Hi Chayne, I recently started fixing up a 127w2, and I'm looking for few parts. From my understanding the w1 and w2 are quite similar. Any chance you'd be willing to part with the paperweight? The post you replied to is from January 6, 2015. Chayne has not logged onto this forum since December 4, 2015. Still, I wish you luck in your hunt for unobtanium parts. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members C3PO Posted May 9, 2018 Members Report Posted May 9, 2018 21 hours ago, Wizcrafts said: The post you replied to is from January 6, 2015. Chayne has not logged onto this forum since December 4, 2015. Still, I wish you luck in your hunt for unobtanium parts. Thanks Wizcrafts. Yes I noticed the dates, just figured it can’t hurt to try. Quote
Moderator Wizcrafts Posted May 9, 2018 Moderator Report Posted May 9, 2018 48 minutes ago, C3PO said: Thanks Wizcrafts. Yes I noticed the dates, just figured it can’t hurt to try. Have you contacted some long time industrial sewing machine dealers? Some who have been in business for 40 or more years could possibly have that type of machine on a steel shelf in a back room where old machines go to die or get resurrected. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members stachs Posted May 10, 2018 Members Report Posted May 10, 2018 I got a 127w2 from a old glove co, it missing bottom shaft ,lots of good parts .still has a the original belt . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.