Members jessie1129 Posted January 12, 2015 Members Report Posted January 12, 2015 I have acquired a used consew 227. The problem is bottom thread has always been loose/looping. I have tried adjusting the tension on bobbin/taking out bobbin and removing debris ect. Upon removing many parts i do notice the needle is hitting the bobin case on its way down. Pretty sure this is not a good thing. Please help Quote
Members shoepatcher Posted January 12, 2015 Members Report Posted January 12, 2015 That machine is probably a little out of time to begin with. and I would also check the needle placement in the feed dog. glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.