Jump to content

Recommended Posts

Posted (edited)

Would like to trade these Singer and Adler parts for parts to complete the restoration of my Singer 45K25. All parts are fully functional. I can post more pictures if needed. Also please feel free to send a PM.

post-52198-0-33432100-1421288715_thumb.j

The above Singer parts are from top left to right:

Part number Description Fitment (perhaps others, please verify for your application)

91576 2 each Feed Dog, fine teeth 45K21, 25, 56, 63, 78 and 89

91422 Feed Dog, coarse teeth 45K21, 25, 56, 63, 78 and 89

91050 Shuttle Race Cap 45K58

91053 Shuttle Race Cap Spring 45K56, 58,and 89

91574 Face Plate 45K56, 58, and 59

thread guides and screws Thread guides and screws 45K21, 25, 56, 63, 78, 89 and others

82503 Tension assembly 45K21, 25, 56, 63, 78, 89 and others

82502 Tension assembly 45K21, 25, 56, 63, 78, 89 and others

This assembly functions, but the SS317

stud needs brazing and re-threading.

14554 Shuttle Race unknown

91611 and 91603 For 91612 Guide Holder Bracket 45K56, 58, 66, 67, 70 and 89

91745 Presser Bar Gripping Bracket 45K56, 58, 66, 67, 70 and 89

82452 Take-up Levers 45K50 and 52

post-52198-0-25418100-1421288683_thumb.j post-52198-0-50203800-1421288684_thumb.j

The above are Adler 5 parts and accessories. Singer used similar accessories for their 45K and other machines. As best I can determine, the parts are Adler except the screws which are new:

Description Similar Singer part number

1. Binding attachment, without spring and screw

(have the drawing to make the spring). 85752

2. Needle/Throat plate, the screw holes fit the

45K cylinder arm unknown

3. Straight Edge Guide 85527

4. Washers and Screws, the washers are Adler,

the screws are new and fit perfectly

the Singer 45K 91168 attachment plate and the unknown

45K guide holder bracket above.

5. Round Edge Guide 86135

post-52198-0-98048900-1421302031_thumb.j post-52198-0-23956800-1421302035_thumb.j post-52198-0-94259100-1421302035_thumb.j post-52198-0-50038600-1421302036_thumb.j post-52198-0-20386800-1421302037_thumb.j post-52198-0-90174600-1421302037_thumb.j

The pictures above are of a Singer Industrial Sewing Machine Electric Motor 4 Groove Pulley Clutch Reducer. I believe the part number is 27635. As best I can measure, the pulleys are 3", 4-1/2", 6" and 7". The smaller three pulleys turn as one, the 7" Pulley is basically stationery until the lever is engaged, then all four pulleys turn together.

For my restoration, I particularly need the 91797 Oil Box, 91168 Guide Plate, 86135 Material Guide and 85824 Material Guide. Also need Various Presser Feet, 95093 Original Singer Bobbins, 85752 Binder, various Special (SS) Singer Screws. Attached is a direct link to the illustrated 45K25 parts list, there's a numerical listing toward the back, so you can see these parts:

http://dixiesewingmachine.tzo.com/MANUALS/SINGERPARTS2/45K21,%2045K25,%2045K63,%20&%2045K78.pdf

What 45K parts do you have to trade or sell? I admire the old machines, they're just difficult to restore.

Thank you very much, I greatly appreciate any help or leads you can offer.

Evo160K

Edited by Evo160K
  • 3 weeks later...
Posted

Needle/throat plate is gone.

  • 1 month later...
Posted

New Information

The 14554 Shuttle Race above fits Singer Model 11-29, perhaps others

  • 2 years later...
Posted

Hi dseddn,

Yes, I believe I have most of it.  What items are you needing?

Thanks

  • Members
Posted

Thanks for getting back to me, the items I am interested in are the following

91576 2 each Feed Dog

91053 Shuttle Race Cap Spring 45K56, 58,and 89

thread guides and screws Thread guides and screws 45K21, 25, 56, 63, 78, 89 and others

82503 Tension assembly 45K21, 25, 56, 63, 78, 89 and others

82502 Tension assembly 45K21, 25, 56, 63, 78, 89 and others

This assembly functions, but the SS317

stud needs brazing and re-threading.

Thanks

 

Posted

Certainly, you're welcome.  Let me pull out those items and I'll get back to you shortly.

Do you have any Singer 45K25 or Singer 45K53 parts to trade?  If you have some Singer or Simanco parts and are not sure what they fit, let me have the numbers, I'll know if they fit my machines.  As I mentioned above, my first choice is to trade because the old parts are near impossible to find.  Thank you.

Posted

Thanks for looking.  I've checked over my parts.  I'll send you a PM this evening.

  • 3 weeks later...
Posted

The following parts are sold:

91576 (2) Feed Dogs

91053 Shuttle Race Cap Spring                       

thread guides and screws

 82502 Tension assembly                                  

91611 and 91603 For 91612 Guide Holder Bracket 

 91745 Presser Bar Gripping Bracket 

 

The following parts are for sale or trade     

Singer 45 Type Roller Foot, generic, no numbers  (the broken tension stud is sold)

IMG_4667.JPG.8058a407716e7fcb6530436038c15828.JPG        

 

 

Oil Box, generic, no numbers

 

IMG_4328.JPG.91aac6878a027919cbae059a9dfce741.JPG

 

 

  • Members
Posted

Hi Al, was wondering what that screw was on the arm of the roller foot??? the one that looks like it is holding the roller on? does your singer one have numbers stamped on it?? and no number inside the lid of the oil box?? it really looks like singer to me?

Posted

Hi Jimi,

Not sure what that screw does.  You may be able to see in the picture the screw going through the wheel and arm is "peened" over, maybe someone put that small screw there to secure the longer screw.  There are no numbers anywhere on the roller foot.  My Singer roller foot has numbers most everywhere.  No numbers anywhere on the oil box in the picture above.

Best regards

 

  • Members
Posted

Ok Thanks Al, iam sure they will go quick as people dont see too many around. regards jimi.

  • 4 months later...
Posted

The generic roller foot has been traded.

  • 4 years later...
  • Members
Posted

Please let me know if there are any parts I can buy for the 45k56.
And do you still have the oil box?

  • 2 months later...
  • Members
Posted

necesito piezas para singer 45k 42 barra y sistema completo de alimentacion gracias de antemano

  • Members
Posted
On 20/1/2022 at 19:22, joseramon said:

necesito piezas para singer 45k 48 barra y sistema completo de alimentacion gracias de antemano

 

Posted
On 1/20/2022 at 11:22 AM, joseramon said:

necesito piezas para singer 45k 42 barra y sistema completo de alimentacion gracias de antemano

Evo160k hasn't been here since 2020, so you aren't going to get any response from them.  I'm locking and archiving this thread in old/sold.

Guest
This topic is now closed to further replies.
×
×
  • Create New...