Evo160K Report post Posted January 15, 2015 (edited) Would like to trade these Singer and Adler parts for parts to complete the restoration of my Singer 45K25. All parts are fully functional. I can post more pictures if needed. Also please feel free to send a PM. The above Singer parts are from top left to right: Part number Description Fitment (perhaps others, please verify for your application) 91576 2 each Feed Dog, fine teeth 45K21, 25, 56, 63, 78 and 89 91422 Feed Dog, coarse teeth 45K21, 25, 56, 63, 78 and 89 91050 Shuttle Race Cap 45K58 91053 Shuttle Race Cap Spring 45K56, 58,and 89 91574 Face Plate 45K56, 58, and 59 thread guides and screws Thread guides and screws 45K21, 25, 56, 63, 78, 89 and others 82503 Tension assembly 45K21, 25, 56, 63, 78, 89 and others 82502 Tension assembly 45K21, 25, 56, 63, 78, 89 and others This assembly functions, but the SS317 stud needs brazing and re-threading. 14554 Shuttle Race unknown 91611 and 91603 For 91612 Guide Holder Bracket 45K56, 58, 66, 67, 70 and 89 91745 Presser Bar Gripping Bracket 45K56, 58, 66, 67, 70 and 89 82452 Take-up Levers 45K50 and 52 The above are Adler 5 parts and accessories. Singer used similar accessories for their 45K and other machines. As best I can determine, the parts are Adler except the screws which are new: Description Similar Singer part number 1. Binding attachment, without spring and screw (have the drawing to make the spring). 85752 2. Needle/Throat plate, the screw holes fit the 45K cylinder arm unknown 3. Straight Edge Guide 85527 4. Washers and Screws, the washers are Adler, the screws are new and fit perfectly the Singer 45K 91168 attachment plate and the unknown 45K guide holder bracket above. 5. Round Edge Guide 86135 The pictures above are of a Singer Industrial Sewing Machine Electric Motor 4 Groove Pulley Clutch Reducer. I believe the part number is 27635. As best I can measure, the pulleys are 3", 4-1/2", 6" and 7". The smaller three pulleys turn as one, the 7" Pulley is basically stationery until the lever is engaged, then all four pulleys turn together. For my restoration, I particularly need the 91797 Oil Box, 91168 Guide Plate, 86135 Material Guide and 85824 Material Guide. Also need Various Presser Feet, 95093 Original Singer Bobbins, 85752 Binder, various Special (SS) Singer Screws. Attached is a direct link to the illustrated 45K25 parts list, there's a numerical listing toward the back, so you can see these parts: http://dixiesewingmachine.tzo.com/MANUALS/SINGERPARTS2/45K21,%2045K25,%2045K63,%20&%2045K78.pdf What 45K parts do you have to trade or sell? I admire the old machines, they're just difficult to restore. Thank you very much, I greatly appreciate any help or leads you can offer. Evo160K Edited January 15, 2015 by Evo160K Share this post Link to post Share on other sites
Evo160K Report post Posted January 31, 2015 Needle/throat plate is gone. Share this post Link to post Share on other sites
Evo160K Report post Posted March 13, 2015 New Information The 14554 Shuttle Race above fits Singer Model 11-29, perhaps others Share this post Link to post Share on other sites
dseddn Report post Posted April 6, 2017 Hi Its a long time since you posted but is there any chance you still have the feed dogs and other 45k89 parts. Thanks Share this post Link to post Share on other sites
Evo160K Report post Posted April 6, 2017 Hi dseddn, Yes, I believe I have most of it. What items are you needing? Thanks Share this post Link to post Share on other sites
dseddn Report post Posted April 7, 2017 Thanks for getting back to me, the items I am interested in are the following 91576 2 each Feed Dog 91053 Shuttle Race Cap Spring 45K56, 58,and 89 thread guides and screws Thread guides and screws 45K21, 25, 56, 63, 78, 89 and others 82503 Tension assembly 45K21, 25, 56, 63, 78, 89 and others 82502 Tension assembly 45K21, 25, 56, 63, 78, 89 and others This assembly functions, but the SS317 stud needs brazing and re-threading. Thanks Share this post Link to post Share on other sites
dseddn Report post Posted April 7, 2017 And 91611 and 91603 For 91612 Guide Holder Bracket 45K56, 58, 66, 67, 70 and 89 Share this post Link to post Share on other sites
Evo160K Report post Posted April 7, 2017 Certainly, you're welcome. Let me pull out those items and I'll get back to you shortly. Do you have any Singer 45K25 or Singer 45K53 parts to trade? If you have some Singer or Simanco parts and are not sure what they fit, let me have the numbers, I'll know if they fit my machines. As I mentioned above, my first choice is to trade because the old parts are near impossible to find. Thank you. Share this post Link to post Share on other sites
dseddn Report post Posted April 7, 2017 Hi the only thing that I have is the Oil box I have it on my 7-5 and it is not the correct one for that machine. Share this post Link to post Share on other sites
Evo160K Report post Posted April 7, 2017 Thanks for looking. I've checked over my parts. I'll send you a PM this evening. Share this post Link to post Share on other sites
Evo160K Report post Posted April 23, 2017 The following parts are sold: 91576 (2) Feed Dogs 91053 Shuttle Race Cap Spring thread guides and screws 82502 Tension assembly 91611 and 91603 For 91612 Guide Holder Bracket 91745 Presser Bar Gripping Bracket The following parts are for sale or trade Singer 45 Type Roller Foot, generic, no numbers (the broken tension stud is sold) Oil Box, generic, no numbers Share this post Link to post Share on other sites
jimi Report post Posted April 24, 2017 Hi Al, was wondering what that screw was on the arm of the roller foot??? the one that looks like it is holding the roller on? does your singer one have numbers stamped on it?? and no number inside the lid of the oil box?? it really looks like singer to me? Share this post Link to post Share on other sites
Evo160K Report post Posted April 24, 2017 Hi Jimi, Not sure what that screw does. You may be able to see in the picture the screw going through the wheel and arm is "peened" over, maybe someone put that small screw there to secure the longer screw. There are no numbers anywhere on the roller foot. My Singer roller foot has numbers most everywhere. No numbers anywhere on the oil box in the picture above. Best regards Share this post Link to post Share on other sites
jimi Report post Posted April 25, 2017 Ok Thanks Al, iam sure they will go quick as people dont see too many around. regards jimi. Share this post Link to post Share on other sites
Evo160K Report post Posted August 30, 2017 The generic roller foot has been traded. Share this post Link to post Share on other sites
ddiuni Report post Posted November 1, 2021 Please let me know if there are any parts I can buy for the 45k56. And do you still have the oil box? Share this post Link to post Share on other sites
joseramon Report post Posted January 20, 2022 necesito piezas para singer 45k 42 barra y sistema completo de alimentacion gracias de antemano Share this post Link to post Share on other sites
joseramon Report post Posted January 24, 2022 On 20/1/2022 at 19:22, joseramon said: necesito piezas para singer 45k 48 barra y sistema completo de alimentacion gracias de antemano Share this post Link to post Share on other sites
Northmount Report post Posted January 24, 2022 On 1/20/2022 at 11:22 AM, joseramon said: necesito piezas para singer 45k 42 barra y sistema completo de alimentacion gracias de antemano Evo160k hasn't been here since 2020, so you aren't going to get any response from them. I'm locking and archiving this thread in old/sold. Share this post Link to post Share on other sites
