yanir Report post Posted January 18, 2015 hi all I wonder if someone might have a suggestion for a problem I'm having with my consew 255rb3 its the model with berrel type stitch regulator I have to adjust stitch length for forward and reverse stitching and make them equal. I checked in consew Resources section on the site and this particular machine model is not described, I also have the older model 255rb2 same machine except the berrel type stitch regulator and there I fixed it with no problem. Does anyone have any Experience with this machine? Also Is there service manual for this model? Thanks! Quote Share this post Link to post Share on other sites
Gregg From Keystone Sewing Report post Posted January 19, 2015 I hear ya, I can't find a thing in regards to this. Even the Consew 255RB-3 book, that says -3 on the cover page, and on each and every parts page...is for a 255RB, RB-1, and RB-2, NOT the -3 that uses a stitch length dial instead of the push button regulator user would press on the bed of the machine. See attached image that is on Similar to the Consew from a different machine. This examining this may help. I can poke around here to see if I have anything more I could upload. Quote Share this post Link to post Share on other sites
