Help With Consew 255Rb-3 Stitch Length Adjustment

[yanir]

hi all

I wonder if someone might have a suggestion for a problem I'm having with my consew 255rb3 its the model with berrel type stitch regulator I have to adjust stitch length for forward and reverse stitching and make them equal. I checked in consew Resources section on the site and this particular machine model is not described, I also have the older model 255rb2 same machine except the berrel type stitch regulator and there I fixed it with no problem. Does anyone have any Experience with this machine? Also Is there service manual for this model?

Thanks!

[Gregg From Keystone Sewing]

I hear ya, I can't find a thing in regards to this. Even the Consew 255RB-3 book, that says -3 on the cover page, and on each and every parts page...is for a 255RB, RB-1, and RB-2, NOT the -3 that uses a stitch length dial instead of the push button regulator user would press on the bed of the machine.

See attached image that is on Similar to the Consew from a different machine. This examining this may help. I can poke around here to see if I have anything more I could upload.