jakeisme30 Report post Posted January 26, 2015 Does anyone know where, or if, there is a reasonably priced supplier of custom rivets. I am looking for someone to make rivets, that have my logo stamped into them. Quote Share this post Link to post Share on other sites
camano ridge Report post Posted January 26, 2015 Not sure what your defenition of reasonably priced is. Who ever does them for youwill charge a set up fee and minimum order. SX Industries http://sxindustries.com/ does custom work. They are a member on these forums. Give them a call. Quote Share this post Link to post Share on other sites
vunm Report post Posted March 6, 2015 Does anyone know where, or if, there is a reasonably priced supplier of custom rivets. I am looking for someone to make rivets, that have my logo stamped into them. we make metal harware in china, we can custom for you,how many you want? Quote Share this post Link to post Share on other sites
TinkerTailor Report post Posted March 9, 2015 Get a small steel logo stamp made and stamp it in yourself after the rivet is set. Then you can use any rivet from anywhere. Whoever you get to make the rivets is going to charge a setup fee to make the stamp to stamp the rivets for you anyways, so you may as well do it yourself. Plus the logo on a pre-embossed rivet is likely to be marred when you set it. Quote Share this post Link to post Share on other sites
Nuttish Report post Posted March 11, 2015 Assuming you're talking about flat or tinners rivets set with a burr, it's not practical to stamp the burr because it will be marred. You could make a jig for stamping the bottom of the rivet with any jewelers mark, but the bottoms are typically distorted from the process of forging the flat part of the rivet. If it's cost/time efficient for you to grind and polish these to make a nice surface for your mark, more power to you. Fashion rivets as for jeans are nipple or cap rivets stamped with a die and closed with a press that does not mark the surface. These are what you commonly seen with a logo e.g. https://grommetmart.com/products/14/jean-rivets.html There will always be an up front tooling cost of 300+ for the die. Turnarounds are not as quick as one might like. Quote Share this post Link to post Share on other sites
chapman Report post Posted May 19, 2015 Hey jake i don't know if this will help but i found standard rivet co. 1800-367-4838 and talk to Pat they will probably make you something.www.standardrivet.com on the web and see what they make. i bought one of their manual machines at a garage sale and they have been really help full with it... Chapman Quote Share this post Link to post Share on other sites
Beni Report post Posted March 26, 2016 You may see this link www.buttoncare.com/sme if helpful Quote Share this post Link to post Share on other sites
