Jump to content
Rossr

Landis 5 In 1

Recommended Posts

Hi Folks,

I recently got a Landis 5 in 1 which I do not need as I have a 3 in 1 that suits me just fine. This machine had a going over and a new paint job. I am selling it in as is condition. A few things the skiving blade seems just fine The round cutting blade has seen a lot of use and is at the end of its life. It will cut heavy leather but it really needs a new blade. (I believe this one had the serrated blade on it. shoe systems plus has it listed at $69.50, I have no affiliation to them) Welt roller looks fine to me I don't know how to test I did run a shoe through it on the welt and it rolled it through fine. That being said I have never used one. Apparently at one point in its life a gorilla used it the blade guard looks like it got turned into the feed wheel and the handle at one point was broken. The handle was brazed you can see a bit of shiny brass I think poking out from the black paint on the handle. Assuming you wont be dropping this off at the zoo for the gorillas to use it seems to work fine. Everything else appears to turn as it should and its looks good and would make a pretty and useful addition to your shop. I am not a professional restorer of these machines but I try to do the best I can and try to list them to the best of my ability Feel free to ask me any questions I can take more pictures if you like too. Lot of life left in this machine. I wish I took a before picture it came out real nice!

Asking $750. Shoot me an offer worst I say is no thanks.

Shipping? I would prefer a local pickup if possible. I am in the Pocono region of Pennsylvania around the Lake Wallenpaupack area. However I would consider shipping if shipping is paid for, I am assuming it will be pricey due to weight.

Thanks for looking

Ross

post-39460-0-86122900-1422326595_thumb.j

post-39460-0-87547900-1422326596_thumb.j

post-39460-0-92706200-1422326597_thumb.j

post-39460-0-75497200-1422326598_thumb.j

post-39460-0-66396400-1422326599_thumb.j

post-39460-0-56119700-1422326600_thumb.j

post-39460-0-35321200-1422326601_thumb.j

Share this post


Link to post
Share on other sites

Folks don't fear shooting me an offer. I wont take offense even if you offer me $25 :) I wont take that but still I had to list a price so I did but feel free to send me a pm happy to talk about it

Ross

Share this post


Link to post
Share on other sites

This machine has been sold. Not sure how to either lock thread or delete or what to do. If a moderator can shed some light great.

Thanks to the buyer

Ross

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...