Dave Richardson Report post Posted March 4, 2015 I made a couple of these daily planner binders with good results. This one is my first attempt at inlays. I used the plug method I read about on here. I attached the cardboard stiffner over the plugs with weldwood contact cement. I attached the liner with weldwood also but before I could get to the lacing around the edges I noticed the liner was bunching up and wrinkling in the middle when I closed the binder. Thinking I might of had some air pockets I pulled the liner off and reglued it, let it set overnight and got the same wrinkling as before. What am I doing wrong ? Thank Dave Quote Share this post Link to post Share on other sites
