Yzabel68 Report post Posted March 30, 2015 Hi everyone ! I have inherited from my dad a pearson no.6 and an Adler the green one, I have the instructions for the adler but not the pearson and now I have the pedals attachment in a separated box, and the wire that I think does attach to the single right pedal that is installed but not sure how to install and adjust this, as well of how to thread it .... I am a leather worker as well, learned from dad, who learned from dad....The adler works pretty well until I use the pedals and loose the beat, then it skips a hole or goes backword...has anyone experience that ? Quote Share this post Link to post Share on other sites
amuckart Report post Posted March 30, 2015 Hi Yzabel, There are three pedals, two that make the machine go, and one that connects to the foot lifter. That's the horizontal bar that runs right across the top of the machine. If you press down on the right hand end of it the foot lifts up. The right hand end has a hole in it, that's where the foot lifter chain or link hooks on to. It goes down through a hole in the stand and connects to the pedal. Here's the current state of a freshly typeset HM6 manual I have been working on. It is free for personal use, but not for re-publication anywhere. This is based on a number of different manuals for the HM6 I have copies of. BUSM HM6 Manual.pdf Quote Share this post Link to post Share on other sites
Evo160K Report post Posted March 30, 2015 Amuckart, That's was a tremendous effort on your part as well as an extremely generous thing to do for the trade. I for one thank you, and I'm sure others do as well. Quote Share this post Link to post Share on other sites
Yzabel68 Report post Posted March 31, 2015 thank you very much, I am sure this will be of great help ! If ever I would be lucky enough to find the instruction manual in my dad's things I will upload it for sure !!! Quote Share this post Link to post Share on other sites
Yzabel68 Report post Posted April 1, 2015 I have received e-mails notifying me of answers wich I can't see here in the topic ??? weird, maybe because it was a bit off topic ? I would like if you could Singermania, post me back the link for the manual for the Pearson no.6 I haven't had the time to print it ;( Thank you !!! Quote Share this post Link to post Share on other sites
Singermania Report post Posted April 1, 2015 HI, they were removed due to some incorrect information. Steve's Leather Machines in Australia are the worlds Pearson no 6 dealers. Muckarts link should be visible above. Regards Steve Quote Share this post Link to post Share on other sites
Yzabel68 Report post Posted February 8, 2016 Hi again ! after almost a year of searching for the shuttle-bobin in all my stuff, I finally found it yesterday !!!! It might sound a bit weird, but I have no clue how it goes in the machine ... read most of the instruction, (nicely given by Singermania) and can't find details or a picture, I just don't want to do this wrong and break something. Especially after i saw how much they are for sale on e-bay !!!! If someone could help, it would be greatly apprciated !!! thank you all Quote Share this post Link to post Share on other sites
