7-31 Singer Flatbed Sewing Machine Complete With Table & Bobbin Winder

[simran]

Located in Eastern South Dakota

This is a Singer 7-31. The 31 designation, in the day, meant that
this machine was a 7 class designed to be run on an old fashioned
overhead, wide belt pulley system with a clutch on the flywheel.
This has all been removed and this machine is mounted IN a table
instead of ON a table; like most of them are. It is in a Singer table
with a Singer low speed motor (1650? rpm) made for the older period
machines. The table was for, I think, a surger as the table has a bit
of a cut out you can see just in front of the bed that accommodated
a wider machine than the 7 Class. The 7 Class sets on two steel
brackets I had made to accommodate the weight of the machine.
As you can see, in the last photo, this machine makes a nice stitch.
Everything works as it should and the paint & decals on this machine
look good for the year. RUNS ON 110V

Price: $1550.00
Call 605.676.2558

I will deliver this machine up to a point free; 50 miles or so. If you
want to ship it; I will put it on a pallet and haul it to Watertown, SD
to a shipping company. I think this machine & table weigh in the
neighborhood of 270-300 lbs. Not sure on that but close I bet. I will
work with you on getting it to where it needs to go.

Edited May 17, 2015 by simran