MarlysRae Report post Posted July 19, 2015 (edited) I have a Cobra Class 18 with a speed reducer and Brushless Digital Servo Motor on it. I have sewn on it for a year, now and feel that I am ready to speed up the motor but cannot remember the sequence to program the motor to run faster. Does anyone know how to do this? Thanks in advance. READ MY ANSWER IN THE POST BELOW. HOW TO PROGRAM THE SPEED ON THE DIGITAL SERVO MOTOR. Edited July 19, 2015 by MarlysRae Quote Share this post Link to post Share on other sites
MarlysRae Report post Posted July 19, 2015 I'm new here and found my answer. I don't know how to remove this post, or I would, sorry. Anyway, what you do to program the digital servo is: Punch the DOWN button until 5.0 shows steady on the read out. Then hit the UP button until it says "5.3" Then hit the DOWN button ONE TIME Then hit the UP BOTTON until you reach the speed you want to stitch at. Once you arrive there, just wait until the machine sets itself and then stitch away. Slow it down the same way. Quote Share this post Link to post Share on other sites
LumpenDoodle2 Report post Posted July 19, 2015 Hi, don't worry, it could be handy info for someone else. Welcome to the forum. Quote Share this post Link to post Share on other sites
MarlysRae Report post Posted July 19, 2015 Hi, LumpenDoodle2! Thank you for the kind welcome. I am not even sure if I am "replying" in the right place. I know this is a great place but I have never taken the time to learn how to use it as I mostly just come to LW.net to read and learn. Thanks again for your reply and welcome! Quote Share this post Link to post Share on other sites
