DuncanSinclair Report post Posted July 23, 2015 I have a couple of dyes (about a qt each) that the original bottles broke on me. I transferred them into mason jars which was useful, but now the lids are starting to rust and leak. I was thinking of moving to something like Nalgene bottles, but not sure if that is the right direction to go.... I have a trip coming up and would like to take them along in something less breakable than glass. What do you do when this happens? Quote Share this post Link to post Share on other sites
Trox Report post Posted July 23, 2015 Use plastic bottle/jar and top up with as less air in them as possible. I use rubber gloves over the lids to make the absolutely air tight. Tor Quote Share this post Link to post Share on other sites
Oldtoolsniper Report post Posted July 29, 2015 http://www.leevalley.com/US/wood/page.aspx?p=72867&cat=51&ap=1 These might be the ticket. I have used the bags out of wine boxes for different finishes. Pry the spout out, rinse the bag and dump your new stuff in. I use it for my vigerroon. You just want to make sure it's done off gassing or you end up with a beach ball sort of thing. Quote Share this post Link to post Share on other sites
DuncanSinclair Report post Posted July 29, 2015 Oldtool: I've not seen those before! Quote Share this post Link to post Share on other sites
Oldtoolsniper Report post Posted July 29, 2015 I have not personally used these from lee Valley but I do buy a lot of their stuff and they are top notch as far as customer service goes. Quote Share this post Link to post Share on other sites
