Members chrstn53 Posted July 31, 2015 Members Report Posted July 31, 2015 Up for sale is my 20 ton hydraulic press that I modified to work as a clicker press. The press has a 3/8" welded steel plate under the top cross bar and above the bottom cross bar. I upgraded to a larger press due to the volume of work I have been receiving. The press works great, I'm just trying to clear up some space in my small shop. If your interested in the press, I am located in Evansville, IN which is in the southern part of Indiana just above Kentucky.
Members EricIsaiah Posted July 31, 2015 Members Report Posted July 31, 2015 Haha, darn... I saw IN and got excited. I'm in Chicago, but that's quite a drive there.
Members chrstn53 Posted July 31, 2015 Author Members Report Posted July 31, 2015 Its a decent haul, I drove up to Chicago a few months back and it was just shy of a 5 hour drive. Too bad I'm at the opposite end of Indiana
Members DoubleC Posted August 1, 2015 Members Report Posted August 1, 2015 (edited) chrstn would you ship this? Texas dies sells these and ups ships them for around 200.00 if they don't go over 150 lbs. Thanks Cheryl Edited August 1, 2015 by DoubleC
Members chrstn53 Posted August 1, 2015 Author Members Report Posted August 1, 2015 Cheryl, I appreciate your interest in my press, but I'm not looking to ship it. I looked at the original stated shipping weight of this press and it is 151 pounds. The steel plates probably add another 30 plus pounds.
Members chrstn53 Posted August 4, 2015 Author Members Report Posted August 4, 2015 For the pm's on location, I am located in Evansville, IN 47725... About 1hr 30min from Louisville, Ky - 2hr and 45 Minutes from Indianapolis, IN and 2hr 30min from St. Louis, MO
Members chrstn53 Posted August 5, 2015 Author Members Report Posted August 5, 2015 The press has been sold.
Recommended Posts