Jump to content
Studio-N

Hulk Smash!

Recommended Posts

This is my latest 3d model of a HULK. This was a 3" woodworking model I made with a thickness of about 1/2" and is the 1st picture.

I have to reduce this to at least 0.12 inches to work on leather. Picture #2 is the resulting impression on leather. You can still make out the muscles but it is not as imposing as the original. After it's painted its still pretty recognizable though. Cheers!

post-2828-0-47072600-1438477623_thumb.jp

post-2828-0-28390600-1438477631_thumb.jp

post-2828-0-43329600-1438477648_thumb.jp

post-2828-0-13093500-1438477667_thumb.jp

Edited by Studio-N

Share this post


Link to post
Share on other sites

Not to bad but sadly you can not legal sell that unless you are licenced which is EXPENSIVE!! but I do like the concept though wouldn't you have to use some thick leather for that?

Share this post


Link to post
Share on other sites

it's not for sale. this is one of my just for fun projects while I improve my modeling skills.

The painted hulk is on 8 oz leather. The undyed is on 2 oz leather. So it's got a pretty

good range. I use a piece of rubber behind the leather piece which helps push it up into the

leather.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...