Studio-N Report post Posted August 2, 2015 (edited) This is my latest 3d model of a HULK. This was a 3" woodworking model I made with a thickness of about 1/2" and is the 1st picture. I have to reduce this to at least 0.12 inches to work on leather. Picture #2 is the resulting impression on leather. You can still make out the muscles but it is not as imposing as the original. After it's painted its still pretty recognizable though. Cheers! Edited August 2, 2015 by Studio-N Quote Share this post Link to post Share on other sites
Windrider30 Report post Posted August 2, 2015 Not to bad but sadly you can not legal sell that unless you are licenced which is EXPENSIVE!! but I do like the concept though wouldn't you have to use some thick leather for that? Quote Share this post Link to post Share on other sites
Studio-N Report post Posted August 2, 2015 it's not for sale. this is one of my just for fun projects while I improve my modeling skills. The painted hulk is on 8 oz leather. The undyed is on 2 oz leather. So it's got a pretty good range. I use a piece of rubber behind the leather piece which helps push it up into the leather. Quote Share this post Link to post Share on other sites
