Members Tallbald Posted August 6, 2015 Members Report Posted August 6, 2015 I really should try before even asking, but through the years I've learned that asking questions BEFORE trying a tool can ease the way and prevent damage to stuff. I'll be making my first belt of laminated leather, two 5/6 thicknesses. Stitching will be about 3/16 inch from the edge. Can't find any videos about the roller guide accessory, but there's bound to be something I should know first.... As always folks. Thank you. Don. Quote
Contributing Member JLSleather Posted August 6, 2015 Contributing Member Report Posted August 6, 2015 Purdy simple stuff... set it and go. That swing away thing? Pay no attention - doesn't help much far as I can tell. I MUCH prefer the swing down version mounted above the feet.. where it actually CAN swing out of the way. The roller version,.. really not much more useful that a solid stop put there. To be clear... is that 3500 just a smaller throat version of the 4500? Seems like the same accessories should work if that's true. Quote
Members Tallbald Posted August 6, 2015 Author Members Report Posted August 6, 2015 yes JLS my 35oo is a shorter throat than the 4500, and has an external bobbin winder instead of integral like the 4500. Thanks too. Don. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.