bylinesupplyco Report post Posted August 6, 2015 I would like to install a roller edge guid on my Pfaff 145. Has anyone done this on this machine? If so where exactly is it installed? Directly to the right of the needle bar and presser foot is the throat plate cover over the bobbin case so it seems as if that wouldn't work. If I ran my leather edge along the guide if it was installed in that spot, any sort of pressure would seemingly just move the throat plate back. Any help on this would be appreciated! Quote Share this post Link to post Share on other sites
Trox Report post Posted August 6, 2015 I would like to install a roller edge guid on my Pfaff 145. Has anyone done this on this machine? If so where exactly is it installed? Directly to the right of the needle bar and presser foot is the throat plate cover over the bobbin case so it seems as if that wouldn't work. If I ran my leather edge along the guide if it was installed in that spot, any sort of pressure would seemingly just move the throat plate back. Any help on this would be appreciated! Hi, have a look at my post #37 in this topic http://leatherworker.net/forum/index.php?showtopic=37299&hl=%20decent%20%20roller%20%20edge%20%20guide&page=3 The priced on these guides are adjusted upwards now. However, it still cheap compared to others. The same guide is also sold by various industrial sewing machine dealers. The upper part of the Pfaff 145 head is very similar, almost identical to the Pfaff 345 cylinder bed machine. I hope this will help you. Tor Quote Share this post Link to post Share on other sites
