lilwaysleather Report post Posted September 8, 2015 Wanting to order a end punch for watch strap making and not sure if 1/2" or 3/4" would be better suited. I have no stores around me that sell them so looking in person is not a option. Watch strap average size that Im starting to make is 18mm and it tapers down to around 16mm which is roughly .62 inches. Obviously the 1/2" is smaller than that but I could move it up towards the end of the strap more before punching. Anyone who has these sizes is the smaller shape of the 1/2" punch a better ftr for smaller projects. Asking because the osborne punches Im eyeing are around $45 a piece and hoping to get the correct one. thanks! Quote Share this post Link to post Share on other sites
