Members DS STRAPS Posted September 21, 2015 Members Report Posted September 21, 2015 Planning a tooling project that has some small detail lines and wondering if there is anything I can use to cut the lines other than a small swivel knife? Quote https://www.facebook.com/dswatchstraps
King's X Posted September 22, 2015 Report Posted September 22, 2015 pretty much anything steel that you can sharpen. I had an Xacto knife blade that broke, so I sharpened it and it now cuts. Quote Greetings from Central Texas! The Grain Side Up blog #TheGrainSideUp
Contributing Member Bob Blea Posted September 22, 2015 Contributing Member Report Posted September 22, 2015 I saw someone on FB recently that took a small eyeglass screwdriver, the kind with the handle end that spins freely, and they sharpened the screwdriver tip and used it as a swivel knife for exactly this purpose. Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Members DS STRAPS Posted September 22, 2015 Author Members Report Posted September 22, 2015 I saw someone on FB recently that took a small eyeglass screwdriver, the kind with the handle end that spins freely, and they sharpened the screwdriver tip and used it as a swivel knife for exactly this purpose. Very nice! I just happen to have a couple of those laying around thanks for the tip! Quote https://www.facebook.com/dswatchstraps
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.