Jump to content
kipling79

Can Chrome Tanned Leather Be Treated Or Sealed?

Recommended Posts

Hello,

After ordering my first "real" holster from Andrews Custom Leather, and being very impressed with the handwork, I have decided to try my own hand at holster making. The massive amount of knowledge on this forum gave me enough confidence to order some leather and a few hand tools.

What I am making: A pocket holster for a S&W Bodyguard .380.

Here is my problem:

I ordered some 5/6oz veg tanned leather from Springfield, as well as a matte Black Calfskin (part 892-3505) for a liner. Upon receiving the leather, I began to worry that the calfskin is chrome tanned, even though both the boil test and burn test provided mixed results.

My Questions/Options:

( a ) Can a Chrome liner be sealed or treated to prevent damage to metal?

( b ) If I dropped the calfskin and left the 5/6oz veg tanned leather unlined, would it be too thin for the purposes of a pocket holster (with emphasis on keeping leather from pushing into trigger guard)?

Thanks for any input.

Edited by kipling79

Share this post


Link to post
Share on other sites

5/6 oz by itself is about ideal for a pocket holster.

Share this post


Link to post
Share on other sites

Denster is right, and you also might want to go flesh side out and grain side in.

Art

Share this post


Link to post
Share on other sites

Thank you for the replies. I wish I had checked this thread two hours ago.

In the time since my OP, I have started my first holster and made my first stitches just a couple hours ago. I never thought about flesh-out, but I still have plenty of leather for more attempts.

To be safe, I did not use the potentially chrome-tanned liner, but use a 1/2 strip along the exterior of the holsters opening. Hopefully this will add a little more rigidity without chrome tan touching any metal.

On a side note: I am happy so far with my first attempt at a holster/leather making, but while the glue was drying I attempted a "simple" magazine pouch; and holy cow that was a twisted disaster. The pattern making step for leatherwork is a little more complex than I gave it credit for.

Edited by kipling79

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...