Members gndy Posted December 6, 2015 Members Report Posted December 6, 2015 Hello Leather workers , i was sewing a miniature prototype of a tote and after turning the bag to the front side the stitching appears as in the pics , any clues on how to prevent that ? Quote
Members gndy Posted December 6, 2015 Author Members Report Posted December 6, 2015 (edited) Pic https://www.dropbox.com/s/erqk2rw1flg4wvv/20151206_203448.jpg?dl=0 Edited December 6, 2015 by gndy Quote
Members DavidL Posted December 6, 2015 Members Report Posted December 6, 2015 Use piping so that does not show. Too thick,too loose of a stitch and too stiff leather will do that. Quote
Members gndy Posted December 6, 2015 Author Members Report Posted December 6, 2015 Use piping so that does not show. Too thick,too loose of a stitch and too stiff leather will do that. Thanks DavidL , i will try that , will skiving the edges of the stitching solve the problem too ? Quote
Members DavidL Posted December 6, 2015 Members Report Posted December 6, 2015 From my brief experimentation I would say yes. Also the more acute/sharp the angle of the joined edge is will create this problem. Quote
Members gndy Posted December 8, 2015 Author Members Report Posted December 8, 2015 Thanx DavidL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.