gndy Report post Posted December 6, 2015 Hello Leather workers , i was sewing a miniature prototype of a tote and after turning the bag to the front side the stitching appears as in the pics , any clues on how to prevent that ? Quote Share this post Link to post Share on other sites
gndy Report post Posted December 6, 2015 (edited) Pic https://www.dropbox.com/s/erqk2rw1flg4wvv/20151206_203448.jpg?dl=0 Edited December 6, 2015 by gndy Quote Share this post Link to post Share on other sites
DavidL Report post Posted December 6, 2015 Use piping so that does not show. Too thick,too loose of a stitch and too stiff leather will do that. Quote Share this post Link to post Share on other sites
gndy Report post Posted December 6, 2015 Use piping so that does not show. Too thick,too loose of a stitch and too stiff leather will do that. Thanks DavidL , i will try that , will skiving the edges of the stitching solve the problem too ? Quote Share this post Link to post Share on other sites
DavidL Report post Posted December 6, 2015 From my brief experimentation I would say yes. Also the more acute/sharp the angle of the joined edge is will create this problem. Quote Share this post Link to post Share on other sites
gndy Report post Posted December 8, 2015 Thanx DavidL Quote Share this post Link to post Share on other sites
