ChrisR8 Report post Posted January 13, 2016 (edited) I am wanting to make some hobbles like the ones pictured. I was wondering if anyone has or knows where I can find a pattern for this type of hobble? Edited January 13, 2016 by ChrisR8 Quote Share this post Link to post Share on other sites
rdl123 Report post Posted January 22, 2016 Hello Chris - I made my own pattern - I will try to upload it along with pictures... Quote Share this post Link to post Share on other sites
ChrisR8 Report post Posted January 22, 2016 That would be great if you could. Thanks Quote Share this post Link to post Share on other sites
rdl123 Report post Posted January 26, 2016 Hello Chris, Sorry for delay in getting this up. Here are a couple pics of the hobbles I built. I changed the pattern after I got these ones made and the final pattern is what I will upload next. The patterns are here: There are two versions - One is a complete pattern - You'll have to have it printed at a professional print shop to be accurate. The others ones are split to print on 8.5" x 11" paper. The buckles I use are these: http://www.longviewleather.com/150-buckle-stainless-steel/ - I buy the 1.5" size. I use 8oz - 10oz Hermann Oak for my hobbles and line them with 6oz - 7oz latigo. I figure that's strong enough. But am open for opinions on that. Any questions let me know. This pattern is something you can tweak to suit your own preference. It should accommodate your typical ranch horse. If you want the proper PDF file of these patterns pm me and I will email it to you. R Quote Share this post Link to post Share on other sites
ChrisR8 Report post Posted January 27, 2016 No worries about the delay and thanks for the pattern. I appreciate the help. I think the pictures should do fine. Quote Share this post Link to post Share on other sites
