Members novaroper Posted January 19, 2016 Members Report Posted January 19, 2016 I have juki 563 I cant turn the machine buy hand unless I remove the feed dog plate but I think the shuttle suppose to be lock in under the plate if the plate is screwed down tight the machine will not role over please help Quote
Members Constabulary Posted January 20, 2016 Members Report Posted January 20, 2016 When it works w/o needle plate I would guess the feed dog is hitting or rubbing on the needle plate so you have to lower it a little bit. Right feed dog hight is when the feed dog sticks out of the needle plate approx. a tooth hight or approx 0.8 - 1mm Also make sure the little tongue of the bobbin case is inside the notch of the needle plate This just a suggestion since I don´t the machine in front of me. I also have attached a 563 manual that came form Keystone Sewing Machine Co. It maybe helpful for the future. Juki_LU-563_Instruction_Keyfooter.pdf Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.