Members Constabulary Posted February 19, 2016 Members Report Posted February 19, 2016 (edited) I was in Nijmegen for the 4 Daagse once. I remember there was a village called Berg en Daal - it was a pain but I made it! Always wanted to do the 4 Daagse twice but I never did. Looking forward to some pictures. Edited February 19, 2016 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Sepp Posted February 19, 2016 Author Members Report Posted February 19, 2016 I bought it for 300,- looks really good, and the belt is like new - surprisingly this clutch motor is much more docile than the one the Durkopp. Even I as a beginner can do leather with it. Regarding the Singer table - it was used for a newer generation overlock machine, so unfortunately nothing for your interest I guess... Thank you both for your help - I am happy the machine came with that nice style lamp - I'll take that cable on the backside anytime for some good lighting. Quote
Members Sepp Posted February 19, 2016 Author Members Report Posted February 19, 2016 Nijmegen, and especially Berg en Dal is located in a nice part of the country...too bad the 4-daagse route goes over less attractive main roads, as it's become so huge... Quote
Members Sepp Posted February 22, 2016 Author Members Report Posted February 22, 2016 Also: can you advise me what feet to look for in order to avoid markings on the leather? Both my Adler 67 and the Durkopp 239 have a textured underside - are there feet available with smooth bottom, or do I have to sand that texture out? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.