Members Mariohanel Posted February 28, 2016 Members Report Posted February 28, 2016 I have a 97-10 for sale which came from the USFS in Alaska it was, according to the serial number, built in the early 50s. I have had several upper and lower needle guide made by a machinist, a few of them still need polishing because they may have sharp edges, it also comes with a wax pot, a bobbin winder several different needles, a chap table and some small parts, all shown in the photos. Most of the time I use 794 needles with a S point with needle guides made to work with this needle system which makes a very nice stitch on anything under 1/2 inch, above a 1/2 and up to an 1 inch I use a cut down 331 and it sews well, I do have about twenty five 3x97 size 24, ten 4x97 size 24, and a few 4x97 in larger sizes. This machine is in very good working condition. Don't really want to sell but I need a machine with a longer arm. I am asking $1950 obo and it is located in Lakeview Or., I will ship but buyer arranges and pays, any questions please call 530-260-0770.
Members Mariohanel Posted February 28, 2016 Author Members Report Posted February 28, 2016 (edited) Thought I would post a video Edited February 28, 2016 by Mariohanel
Members Mariohanel Posted February 29, 2016 Author Members Report Posted February 29, 2016 I'm sorry I can't get the video to load and I don't know enough about the inter web to link things but I am learning, anyway if anyone wants to see a video for now they will have to go to my Facebook page, Hanel's Saddle shop. Thanks Mario
Members Mariohanel Posted March 6, 2016 Author Members Report Posted March 6, 2016 This machine has been sold. Thanks Mario
Recommended Posts