Evo160K Posted April 2, 2016 Report Posted April 2, 2016 (edited) I'm restoring two Singer 45 industrial machines and would like to buy a couple of original Simanco presser feet, feed dogs and throat plates. Would you please PM the Simanco part number, a picture showing the part number and a price? Thank you. Edited April 2, 2016 by Evo160K
Evo160K Posted May 15, 2016 Author Report Posted May 15, 2016 These parts are turning out to be really difficult to find. Anyone have any leads or know where I might find one or two? Thanks all.
Members Yetibelle Posted May 22, 2016 Members Report Posted May 22, 2016 Do you have the subclass 45 machine parts your looking for?
Evo160K Posted May 25, 2016 Author Report Posted May 25, 2016 Yetibelle, Just the original Simanco that came with the machines plus some non-singer that I found online. I've had to makes one or two other versions, but of course those are not marked Simanco. I would like to have a couple of spares, "just in case" and perhaps other styles for other types of work. Thank you for asking.
Members secondcrk Posted July 30, 2016 Members Report Posted July 30, 2016 Dis you try Ralphs Industrial in CO?
Evo160K Posted July 30, 2016 Author Report Posted July 30, 2016 Secondcrk No, but I will. Thank you for the lead.
Mark842 Posted July 30, 2016 Report Posted July 30, 2016 Not sure if this is what you need but it might be. I have purchased from these guys many times when I restored one of my Singer machines. Their shipping and prices are fair. They have a lot of stuff others don't! https://www.college-sewing.co.uk/store/Singer45KSewingMachineParts
Evo160K Posted July 31, 2016 Author Report Posted July 31, 2016 Thanks for the link, Mark. I'll contact them and see what else they have.
Members TwoWayTrauma Posted August 3, 2016 Members Report Posted August 3, 2016 I would also recommend Ralphs. I have bought a few machines from them, and every time I went there for a machine, the head dude (I don't remember his name, but it wasn't Ralph), was more than happy to show me a bunch of the kind I was looking for and test them out. Hopefully they have you part, but if they don't, and no one else does, they do have a full machine shop on site that can manufacture just about anything. Chuck
Trox Posted September 1, 2016 Report Posted September 1, 2016 The 45K came in a variety of different subclasses and even more different presser footˋs. Without knowing your/what subclass you are looking for a presser foot/ plates for is difficult. The only new stuff sold for the 45K Adler 5/4 and clones are the narrow harness foot manufactured in China (sold by Cowboysew, try Cowboy Bob, Toledo Industrial Sewing machines) You can see this harness foot in the site of Cowboysew.com . I think it would be very difficult to find the parts you looking for, you might be lucky. I had some of these parts before, unfortunately I sold them several years ago. I would advice you to specify what parts you are looking for with a picture and part number. This way it would be easier, somebody might have these old part but do not know what they are for. Good luck Tor
Evo160K Posted September 2, 2016 Author Report Posted September 2, 2016 Trox, Good suggestion, thank you. Here are two lists of parts that I'd like to have.......one for Singer 45K25 and one for Singer 45K53. They're the lists I gave to Ralph's Industrial to check. I don't have pictures, but since I'm only wanting original Simanco parts, the Simanco part numbers should be adequate. If anyone has a part marked Simanco, it's easy enough to check the lists for that number. Thanks again, Trox.
Trox Posted September 2, 2016 Report Posted September 2, 2016 There always some old iron around you might be lucky if the add can be seen by enough people, "bump" it to keep it alive frequently. It's like someone asked me to sell the original saddlers attachment pack for my old Adler 5-27 (who's basically the same machine as a 45 K cyl.bed with jumpfoot) without buying the machine. I could not sell one without the other. That said, you can't get anything without trying; and there's a lot more Singer machines out there than Adlers. Good luck Tor
Evo160K Posted September 3, 2016 Author Report Posted September 3, 2016 Yes, I will bump it from time to time. Thanks for the advise, Trox.
Evo160K Posted September 20, 2016 Author Report Posted September 20, 2016 LW member Uwe found a few parts for me. Thank you Uwe, thank you very much.
Evo160K Posted October 5, 2016 Author Report Posted October 5, 2016 LW member Constabulary found a couple of feet for me. Thank you Constabulary, thank you very much.
Evo160K Posted December 13, 2016 Author Report Posted December 13, 2016 Still looking. They're difficult to find.
Evo160K Posted February 6, 2017 Author Report Posted February 6, 2017 Any one know where I might find some of these parts? Thanks very much.
Evo160K Posted July 23, 2017 Author Report Posted July 23, 2017 Anyone have any or have a suggestion where I might look?
Evo160K Posted October 24, 2017 Author Report Posted October 24, 2017 Still looking. Any help will be appreciated.
Members TLWRVA Posted November 11, 2017 Members Report Posted November 11, 2017 I likely have the parts you're looking for. Send me a message with the parts you need and I'll look through my stock.
Evo160K Posted November 14, 2017 Author Report Posted November 14, 2017 TLWRVA, Did you receive the PM I sent?
Members TLWRVA Posted November 30, 2017 Members Report Posted November 30, 2017 I did! Sorry for the delay I’ve been all over. Looking at my parts tonight! I’ll pm you
Evo160K Posted November 30, 2017 Author Report Posted November 30, 2017 No problem! Look forward to your pm
Recommended Posts