RustyMelton Posted January 17, 2009 Author Report Posted January 17, 2009 Great Work as always Rusty!Now put it on AZ! Thank you John, it means alot coming from you. I took your advice and used a different lid on this one, I like it better, it's a bit more protective. Rusty Quote
RustyMelton Posted January 17, 2009 Author Report Posted January 17, 2009 Thank you very much Rusty!!! The design does look familiar to me;-) Very cool case and as usual some very elegant carving. Tom Thanks Tom it turned out pretty decent. I love your stuff, I guess it shows. Rusty Quote
RustyMelton Posted January 17, 2009 Author Report Posted January 17, 2009 A couple more pics of it finished. Quote
JohnBarton Posted January 18, 2009 Report Posted January 18, 2009 Two more. That's beautiful. I have not been a real big fan of the teardrop shape for cases but you pull it off perfectly. I know the cap was more of a pain but it does complete the case so much better imo. I especially like the way the interior tubing looks. It seems to be padded and cushy which appeals to my sense of protectiveness. You know I am stickler for cues not rattling. You knife sheath makers will appreciate this, cues can cost upwards of six figures with an awful lot of them being in the four figure range. Do it's really important - to me at least - to make sure that they fit snugly in the case. Very nice job on the interior Rusty and you know I don't say that lightly. Well, if you get a website or let me know your contact info I will add you to my list of recommended case makers on my website. I know that this is part time stuff for you but I'd sure like it if more people were aware of your work. John Quote Support Quality. We are all humans. Buy the best no matter where it's made. That way everyone lives in harmony. Nature knows no flags.
RustyMelton Posted January 18, 2009 Author Report Posted January 18, 2009 That's beautiful. I have not been a real big fan of the teardrop shape for cases but you pull it off perfectly. I know the cap was more of a pain but it does complete the case so much better imo. I especially like the way the interior tubing looks. It seems to be padded and cushy which appeals to my sense of protectiveness. You know I am stickler for cues not rattling.You knife sheath makers will appreciate this, cues can cost upwards of six figures with an awful lot of them being in the four figure range. Do it's really important - to me at least - to make sure that they fit snugly in the case. Very nice job on the interior Rusty and you know I don't say that lightly. Well, if you get a website or let me know your contact info I will add you to my list of recommended case makers on my website. I know that this is part time stuff for you but I'd sure like it if more people were aware of your work. John Thanks again John. I agree the lid is a big improvment in both looks and protection. It seemed like alot more work at first but has proved to be easier than I first thought after a couple of cases. Plus I think it's worth it simply because of the overall look of the case. The padded tubes are another improvement, its stops the movement of the cues in the tubes and is really soft, that type interior is one of the reasons I love my old Instroke case. I don't have website yet but have been thinking about it because somewhere down the road I would like to be able to devote alot more time to making cases, I just can't get enough of it. Thanks again, this website rocks! Rusty Quote
Members SteveBrambley Posted January 18, 2009 Members Report Posted January 18, 2009 I agree, that is a really beautiful case, and as John says you have handled the 'Teardrop' shape very well. I have to use a similar technique for the 'Blocked-Ends' of my leather gunslips, however, I have to use a special corner stitching machine, as my hand stitching is not too good, unlike yours which is excellent! This is the result I get with the machine: Not a patch on your work I'm afraid. Steve Quote
RustyMelton Posted January 19, 2009 Author Report Posted January 19, 2009 I agree, that is a really beautiful case, and as John says you have handled the 'Teardrop' shape very well. I have to use a similar technique for the 'Blocked-Ends' of my leather gunslips, however, I have to use a special corner stitching machine, as my hand stitching is not too good, unlike yours which is excellent!This is the result I get with the machine: Not a patch on your work I'm afraid. Steve Hi Steve, thanks for the kind words. Your gun case looks great, what kind of machine do you use to sew that? I'm trying to save up to get a sewing machine, my hands get sore. Rusty Quote
Members SteveBrambley Posted January 19, 2009 Members Report Posted January 19, 2009 Hi Steve, thanks for the kind words. Your gun case looks great, what kind of machine do you use to sew that? I'm trying to save up to get a sewing machine, my hands get sore. Rusty Hi Rusty, The type of machines I use are the Singer 45Ksv100 (see pic) they are pretty rare these days, as few people are able to use them, it took me 3 months to get used to stitching with one! But they are worth the effort in the end. They can be used to stitch all kinds of cases, binoculars, cameras etc. Steve Quote
RustyMelton Posted January 20, 2009 Author Report Posted January 20, 2009 Hi Rusty,The type of machines I use are the Singer 45Ksv100 (see pic) they are pretty rare these days, as few people are able to use them, it took me 3 months to get used to stitching with one! But they are worth the effort in the end. They can be used to stitch all kinds of cases, binoculars, cameras etc. Steve Wow, really cool. It really makes the ends looks nice. Sounds like I better get used to doing it by hand. Rusty Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.