Members joet Posted July 12, 2006 Members Report Posted July 12, 2006 Tom you might check out "How To Make Holsters" by Al Stolhman. I know there is a section in there about shoulder holsters. If you don't have it you can get it from both Hidecrafters and Tandy. I'm not much of a holster man. I have only made one and that turned out just ok. Nothing great, just ok. But it worked. Quote
Members SmilinJim Posted July 12, 2006 Members Report Posted July 12, 2006 Hey folks A suggestion only. I got the Stolman holster book and its great. However, make a mockup of the shoulder rigging from poster board first. I used his pattern and cut leather but it was too small for me (and the guy I was doing the holster for). Had to manipulate a little. Just the thing we're supposed to be able to do, right. I did one for a Smith .357 and it was heavy, had to change the cut again. Experiment, but my experience says to do a mockup first. Might save some expensive leather. Jim Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.