Miquel Report post Posted July 26, 2017 (edited) Hi guys, anyone knows wich needle system is using these Claes Machine??? Please, see photo of the machine. As I was looking for this info and I don't find it, hope that anyone here maybe know it, thanks in advance!!!!!! Edited July 26, 2017 by Miquel Quote Share this post Link to post Share on other sites
Miquel Report post Posted July 27, 2017 I attach a photo of the needle, maybe help a little bit. The needle is completely rounded on the above part. ( Not flat side, completely round) Quote Share this post Link to post Share on other sites
Constabulary Report post Posted July 27, 2017 This is a clone or re branded Adler Class II. I once had one of these but actually mine was the predecessor Class III which is slightly different. The original needle system for my former Class III was 731 or 736 (both obsolete). In mine I was able to use 794 needles - BUT as far as I remember the earlier Modell Class II needed a longer needle System 1000 or the like. If you send me a PM I can send you a German language manual for the Class III - maybe it helps you a bit. Maybe you are interested in this thread: Quote Share this post Link to post Share on other sites
Miquel Report post Posted July 27, 2017 Hi Constabulary, thanks for your support, the PM has been sent. I will check now your linked post, many thanks again¡¡ Quote Share this post Link to post Share on other sites
