Jimmy McLaughlin Report post Posted October 24, 2017 I am looking for a stamp maker that can duplicate my clubs patch below. I don't have an arbor press, I would like to be able to stamp it by hand or both if possible. The widest part of the stamp is 3 1/4 " I would appreciate any information that you can give me. I am going to use it for small cases. Jim Quote Share this post Link to post Share on other sites
BearClawLeather Report post Posted October 24, 2017 (edited) If you are looking for a stamp to hammer in, I would see if www.stampsforleather.com can help. He makes his stamps out of really dense plastic and his stamps are super clean. Attached is a stamp he made me for a custom lawyer ID wallet. 1.5 x 1.5 stamp Edited October 24, 2017 by BearClawLeather typos Quote Share this post Link to post Share on other sites
Jimmy McLaughlin Report post Posted October 24, 2017 That is really nice, and just what I am looking for. Thank you Bear Claw. I will send him an e-mail. Jim Quote Share this post Link to post Share on other sites
Jimmy McLaughlin Report post Posted October 24, 2017 7 minutes ago, Jimmy McLaughlin said: That is really nice, and just what I am looking for. Thank you Bear Claw. I will send him an e-mail. Jim When I go to that web site a lot of stamp makers come up. Do you have a name? Jim Quote Share this post Link to post Share on other sites
Sheilajeanne Report post Posted October 24, 2017 And I am also interested in getting a stamp made, and can't access the site AT ALL! Quote Share this post Link to post Share on other sites
BearClawLeather Report post Posted October 24, 2017 1 hour ago, Jimmy McLaughlin said: When I go to that web site a lot of stamp makers come up. Do you have a name? Jim here is his direct email turnerlaserworks@gmail.com Quote Share this post Link to post Share on other sites
Studio-N Report post Posted October 25, 2017 there is also www.maker-stamps.com Quote Share this post Link to post Share on other sites
Jimmy McLaughlin Report post Posted October 28, 2017 I spoke with a few people about getting a stamp made of my metal detecting clubs logo. I sent them a picture of the logo, pictured is above. They both told me the same thing. They would have to send a photo of the patch to their graphic designer and they would have to run it on their program. They would of course charge me. As you all know, people don't want to spend a lot of money on leather work the way it is. At least not my leather work. Quote Share this post Link to post Share on other sites
Jimmy McLaughlin Report post Posted October 28, 2017 Bear Claw, How did he copy your logo? Jim Quote Share this post Link to post Share on other sites
buko Report post Posted October 28, 2017 Jimmy, I made you a version of the logo you can send out for a stamp to be made. Its not perfect - just did it real quick but you can have them adjust it for you. PM me your email and I'll send you all the files if you can't download these here. md club logo.pdf md club logo.svg Quote Share this post Link to post Share on other sites
KingsCountyLeather Report post Posted October 28, 2017 On 24/10/2017 at 8:46 PM, Jimmy McLaughlin said: I am looking for a stamp maker that can duplicate my clubs patch below. I don't have an arbor press, I would like to be able to stamp it by hand or both if possible. The widest part of the stamp is 3 1/4 " I would appreciate any information that you can give me. I am going to use it for small cases. Jim I used Studio-N from this forum for my stamps and was very happy with his service! Even when I made a mistake on my doing... he re-made a replacement stamp at no charge to me. I will be using his services in the future! Quote Share this post Link to post Share on other sites
toe2short Report post Posted November 3, 2017 Thank you Biko . I had someone do the design and make the stamp. I will post it when I get the stamp. It cost $95 total. The stamp is 2 1/4” at the widest point. Quote Share this post Link to post Share on other sites
huella Report post Posted November 16, 2017 (edited) Hi, You don need a heavy and high expensive machine to do your own stamps. I have only one drill table with the upper part composed of two sections, one of which moves thanks to two threaded rods.With a little patience and making cheap logos in methacrylate with a laser cut machine, I have managed to make these 22mm watch straps: Edited November 16, 2017 by huella Quote Share this post Link to post Share on other sites
SouthernCross Report post Posted November 17, 2017 Very nice straps, sir. Quote Share this post Link to post Share on other sites
huella Report post Posted November 20, 2017 On 17/11/2017 at 2:31 AM, SouthernCross said: Very nice straps, sir. Thanks. Quote Share this post Link to post Share on other sites
