Members KingsCountyLeather Posted October 28, 2017 Members Report Posted October 28, 2017 On 24/10/2017 at 8:46 PM, Jimmy McLaughlin said: I am looking for a stamp maker that can duplicate my clubs patch below. I don't have an arbor press, I would like to be able to stamp it by hand or both if possible. The widest part of the stamp is 3 1/4 " I would appreciate any information that you can give me. I am going to use it for small cases. Jim I used Studio-N from this forum for my stamps and was very happy with his service! Even when I made a mistake on my doing... he re-made a replacement stamp at no charge to me. I will be using his services in the future! Quote
Members toe2short Posted November 3, 2017 Members Report Posted November 3, 2017 Thank you Biko . I had someone do the design and make the stamp. I will post it when I get the stamp. It cost $95 total. The stamp is 2 1/4” at the widest point. Quote
Members huella Posted November 16, 2017 Members Report Posted November 16, 2017 (edited) Hi, You don need a heavy and high expensive machine to do your own stamps. I have only one drill table with the upper part composed of two sections, one of which moves thanks to two threaded rods.With a little patience and making cheap logos in methacrylate with a laser cut machine, I have managed to make these 22mm watch straps: Edited November 16, 2017 by huella Quote
Members SouthernCross Posted November 17, 2017 Members Report Posted November 17, 2017 Very nice straps, sir. Quote
Members huella Posted November 20, 2017 Members Report Posted November 20, 2017 On 17/11/2017 at 2:31 AM, SouthernCross said: Very nice straps, sir. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.