Members naklumb Posted November 2, 2017 Members Report Posted November 2, 2017 Hi all, I'm working on making a set of these place mats and I am new to using finishes and sealants. I know i probably wont be able to get them completely waterproof but I would at least make them resistant to dropped food and minor spills. I've read thru some of the posts in here and I'm considering using Fiebings Resolene, but I would greatly appreciate your expert opinions. Thanks, Nick Quote
Contributing Member fredk Posted November 2, 2017 Contributing Member Report Posted November 2, 2017 I would; a/ use resolene thinned 1:1 with water b/ dip tray coat it with at least two coats, letting dry in between each coating. Hang up, clipped by a corner to allow the excess Resolene to run and drip off, into a tray or waste paper; speeds up the drying too especially if you have warm air blowing around them Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.