Jump to content

Recommended Posts

HI,I HAVE A QUESTION IS THERE ANYBODY THAT KNOWS HOW TO TWIST DEERSKIN FRINGE AND MAKE IT STAY TWISTED? I JUST CANT GET IT TO STAY AND NOT UNRAVEL.

THANKS, CHUCK/BUFFALOROBES

Share this post


Link to post
Share on other sites

I spray it with water, and it usually holds the twist. I've think it's called "Cheyenne fringe" when it's done that way. Welcome to leatherworker.net! Hope you enjoy yourself here.

Johanna

Share this post


Link to post
Share on other sites

Welcome to the leatherworker.....

Share this post


Link to post
Share on other sites

I wet it good. Then put a lot of twist into it, and secure while it dries. Usually I use binder clips, clamping 4-5 strands at a time. On the old posts, someone mentioned twisting and putting a small tack in the end of each strand as they dry. I know guys who spray with felt hat stiffener too. Haven't tried it yet.

Share this post


Link to post
Share on other sites

The easiest way I've found to twist fringe is to use Shoe Stretch instead of water, it's really a diluted mixture of rubbing alcohol except Shoe Stretch costs about fifteen dollars a gallon and rubbing alcohol is dirt cheap in the grocery store. soak your fringe in that instead of water, twist each fringe tight, put your finger on the base of the fringe holding it tight against the bench so you don't pull a weak one off and pull the fringe tight, hold each one for a few seconds and release it, it will relax some but by overtwisting it to begin with once it relaxes a little you'll have about what you expect. Just let it dry and it will stay twisted. It's pretty fast this way if your hands don't cramp up you can do a pair of chinks in a little over an hour if you don't weaken.

Share this post


Link to post
Share on other sites

N.C.,

I don't think that method will on on a pair of chaps or chinks. JMO I also use Stretch solution made by Sellari's or someone like that. It is pretty much a mixture of dnatured alchohol and distilled water, I believe.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...