EweSoKnotty Report post Posted April 3, 2018 I am looking for a speed reducer for my Juki 1541s. I was wondering what the most reputable and best speed reducer would be for this machine. Googling helps but doesn't come close to those with working experience! Quote Share this post Link to post Share on other sites
bikermutt07 Report post Posted April 4, 2018 If you're in the States give Cobra Steve or Cowboy Bob a call. I'm sure they can help. Quote Share this post Link to post Share on other sites
Nuttish Report post Posted April 15, 2018 On 4/3/2018 at 5:59 PM, EweSoKnotty said: I am looking for a speed reducer for my Juki 1541s. I was wondering what the most reputable and best speed reducer would be for this machine. Googling helps but doesn't come close to those with working experience! I would recommend a servo motor for nearly anyone who doesn't need a 1HP + motor. You can get decent 550W (3/4HP) and 750 (1HP) motors for less than $150 and $200 shipped if you look. We use ones like this on two lockstitch machines. They appear to be rebranded Consew or acceptable quality knockoffs. They have needle position sensors and allow you to program min and max speeds, speed ramp up, and needle up or down. I quite like them. I have a Rex motor without control unit or position sensor, but that does allow max speed control with a dial on the motor, on an overlock machine. It's good if you don't care about those extra features, which don't make sense on an overlock machine anyhow. Quote Share this post Link to post Share on other sites
EweSoKnotty Report post Posted May 10, 2018 I actually have a servo but thank you. I ended up with a speed reducer from Springfield Leather I appreciate it guys! Quote Share this post Link to post Share on other sites
