Leather stitcher Report post Posted July 14, 2007 CB 441 Extra heavy duty, cylinder bed leather stitching machine Sews saddle and harness better than any other stitcher built today APPLICATION: This machine has become the standard in the saddle and harness industry. It has been widely used for stitching bullet loops, saddle skirts, headstalls, halters, breatstcollars, holsters, knife sheaths, chaps, knee pads, covered stirrups, gun belts, cases and other leather craft. The machine can also be used to stitch luggage, suitcases, heavy hand bags, heavy textile products, briefcases, and the like. FEATURES: 1. This machine has outstanding capability in feeding multi-layers of heavy materials due to its compound feed mechanism. The compound feed mechanism of this machine features a feed dog, walking foot, and needle feed that all work in unison to insure feeding of the most difficult materials with ease. The CB-441 allows one to sew from 4 layers of 16 oz. harness leather down to thin chap material without needing to excessively adjust the sewing machine tensions. 2. The length of the arm on this machine is 420mm (16.5 inches), suitable for stitching very large articles. 3. The presser foot lift is up to 23mm (7/8) for smooth placement/removal of extra heavy materials. 4. The machine also features a reverse stitch for tying stitches when you start and stop or for any reinforcement in your project. 5. Special flatbed tabletop attachment available that allows the cylinder arm sewing surface to be converted to a flat sewing surface to allow for better stitching with certain types of work. 6. 12 inch power fly wheel is available to create more torque for very heavy work. This fly wheel is the largest flywheel of its kind. 7. Revolutionary and exclusive new titanium coated shuttle hook, hook cover, shuttle race and body ensure reduced wear and prolonged life for these critical and expensive sewing machine components. This system will double the life of these parts, making costly replacements of these parts a thing of the past. 8. A full array of attachments is available for this machine, including many different styles of presser feet, material guides, stirrup plate, and the like. 9. With SCHMETZ needles special for leather stitching. Similar to: Juki TSC-441, Adler 205-370, Singer 45K, Seiko CH-8B and Global WF 905, Artisan Toro 4000 and Ferdco Pro 2000 SPECIFICATIONS: * Max Sewing speed: 800 S.P.M. * Max Stitch length: 11 mm * Lift of presser foot: 23 mm * Length of sewing arm: 16.5 inches * Needle system: DYX3 or 794S Please refer to http://www.cowboysew.com for more machines, thank you! (fixed link~~Johanna) Quote Share this post Link to post Share on other sites
Art Report post Posted July 14, 2007 Ok, Is this Ryan? How do we get 4 layers of 16oz under a presser foot that only lifts 7/8 inch? Can you give us a list of shows you will have your machines at for demo. Can you give us a list of saddlemakers who have your machine? Art CB 441 Extra heavy duty, cylinder bed leather stitching machineSews saddle and harness better than any other stitcher built today APPLICATION: This machine has become the standard in the saddle and harness industry. It has been widely used for stitching bullet loops, saddle skirts, headstalls, halters, breatstcollars, holsters, knife sheaths, chaps, knee pads, covered stirrups, gun belts, cases and other leather craft. The machine can also be used to stitch luggage, suitcases, heavy hand bags, heavy textile products, briefcases, and the like. FEATURES: 1. This machine has outstanding capability in feeding multi-layers of heavy materials due to its compound feed mechanism. The compound feed mechanism of this machine features a feed dog, walking foot, and needle feed that all work in unison to insure feeding of the most difficult materials with ease. The CB-441 allows one to sew from 4 layers of 16 oz. harness leather down to thin chap material without needing to excessively adjust the sewing machine tensions. 2. The length of the arm on this machine is 420mm (16.5 inches), suitable for stitching very large articles. 3. The presser foot lift is up to 23mm (7/8) for smooth placement/removal of extra heavy materials. 4. The machine also features a reverse stitch for tying stitches when you start and stop or for any reinforcement in your project. 5. Special flatbed tabletop attachment available that allows the cylinder arm sewing surface to be converted to a flat sewing surface to allow for better stitching with certain types of work. 6. 12 inch power fly wheel is available to create more torque for very heavy work. This fly wheel is the largest flywheel of its kind. 7. Revolutionary and exclusive new titanium coated shuttle hook, hook cover, shuttle race and body ensure reduced wear and prolonged life for these critical and expensive sewing machine components. This system will double the life of these parts, making costly replacements of these parts a thing of the past. 8. A full array of attachments is available for this machine, including many different styles of presser feet, material guides, stirrup plate, and the like. 9. With SCHMETZ needles special for leather stitching. Similar to: Juki TSC-441, Adler 205-370, Singer 45K, Seiko CH-8B and Global WF 905, Artisan Toro 4000 and Ferdco Pro 2000 SPECIFICATIONS: * Max Sewing speed: 800 S.P.M. * Max Stitch length: 11 mm * Lift of presser foot: 23 mm * Length of sewing arm: 16.5 inches * Needle system: DYX3 or 794S Please refer to http://www.cowboysew.com for more machines, thank you! (fixed link~~Johanna) Quote Share this post Link to post Share on other sites
Leather stitcher Report post Posted July 17, 2007 Art, Please contact Ryan at 330 892 0102 or 692-1418. Surely he can show you the list of customers. Also you can go to his warehouse (in Ohio) to experience the machine personally, if you like. Kindest regards, Bill Quote Share this post Link to post Share on other sites
StolpSaddles Report post Posted January 19, 2009 I have one and am very happy with it, had it for 2 years now. Quote Share this post Link to post Share on other sites
