Moderator Wizcrafts Posted January 1, 2019 Moderator Report Posted January 1, 2019 6 hours ago, Bennettm said: Ok these parts do raise and lower the feed dogs. BUt the still stay at the same level throughout the stitch cycle. I am hoping there is an adjustment to get them to drop down when they move back. 04335834-C8E7-4205-AF37-FA2B33ABCC46.MOV I cannot open that movie file in my Windows 10 PC. What program was it created with? What type of device and operating system did you use? Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Bennettm Posted January 1, 2019 Author Members Report Posted January 1, 2019 8 hours ago, Wizcrafts said: I cannot open that movie file in my Windows 10 PC. What program was it created with? What type of device and operating system did you use? I think my answer may not be adequate, but I will do the best I can. The video was taken on my iPhone 8, and I posted it from my iPad, with the latest operating system Apple offers me. Quote
Members Bennettm Posted January 1, 2019 Author Members Report Posted January 1, 2019 On 2018-12-31 at 1:14 AM, Constabulary said: It is also possible that you have a dedicated binding machine - as far as I recall you can tell the difference by opening the top lid near the hand wheel, There usually is missing the 2nd drive rod which is controlling the up and down movement of the feed dog. If the rod is missing your feed to only moves back and forth. You also can tell when you look on the underside. there is not drive rod attached to the upper rod. Hope you know what I mean - I have to look for pictures.... Edit: see pictures - I think you will notice the difference. Not sure if you have a binding machine but pictures tell the difference. Thank you for that information! Here is a picture of my top and bottom. I think there is a linkage to the top, but maybe your experienced eye can tell me for sure. IMG_1093.HEIC Just now, Bennettm said: Thank you for that information! Here is a picture of my top and bottom. I think there is a linkage to the top, but maybe your experienced eye can tell me for sure. IMG_1093.HEIC I am not able to upload the bottom view! Quote
Members raymiemack Posted February 17, 2019 Members Report Posted February 17, 2019 On 12/30/2018 at 8:58 PM, Bennettm said: My problem is not to raise thefeed dogs, but for them to drop as the needle foot goes up and back. Hope this makes sense to someone... This is what I have found with the Pfaff 145 I have just bought......looks like it is like yours and meant to feed the way it does. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.