Members ricroy Posted January 19, 2019 Members Report Posted January 19, 2019 It is a good idea to leave the bottom of the sheath with excess leather 1/4" or so out from the edge. this gives support and helps keep the sheath flat on the machine while sewing. Trim it after sewing . Then dress the edge of the sheath by sanding or how ever you need to. then do the burnishing process. Also you can groove a stitch line on bottom as on the top.. if you can install a thread lubricating an oil pot on the machine it will help sew through the leather. i just ordered one for my Cobra 4.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.