Brian1543 Report post Posted July 16, 2019 Hello all, I just picked up a Singer 111w155 and I am beginning the process of getting it up and running. It needs a new timing belt but other than that, everything seems to be moving smoothly after a quick clean up. One of the projects I see on the horizon is a new table. The one that it came on has a bow of about 3/8" in the middle no doubt due to that beast of a clutch motor that was hanging under it. Are there any good diagrams out there of the table openings and various mounting points for the accessories? Better yet, are there any CAD files of same that people are willing to share? I have access to a CNC router and a good CAD file would help a lot. I am not above making some templates and doing the work by hand, but this might be a good reason to try out my buddies CNC. Thanks in advance for any replies. Quote Share this post Link to post Share on other sites
leecopp Report post Posted July 16, 2019 The Keystone Sewing Machine Company has a nice on-line Seiko Manual manual .. see page 2 . here is the link ... http://www.keysew.com/Webpages/Owners&PartsBooks/OwnersBooks/STH-8BLD-3Ownerskeyfoot.pdf . Good luck. Quote Share this post Link to post Share on other sites
Brian1543 Report post Posted July 16, 2019 Thank you for the information leecopp. That diagram is slightly different from what my current top looks like but I assume the head unit is same dimensions. I will confirm this and see if I can make the necessary adjustments from there. This is not very pressing so it will give me some time to work on it. Quote Share this post Link to post Share on other sites
