dabneytr Report post Posted November 30, 2019 I have a walking foot badged as a Chandler 406RB, but no other markings. The presser foot is a low shank 3/4" where the height is 1-1/8". Everything I see for sale have a total height of 1-5/8". Also the inner foot has an attachment diameter of 1/4" to 5/16" which is larger then then what I see sold with a diameter of 3/16". I included pics of the machine and the current feet. I also included a picture of the my feet (lower pair in pic) compared to what I bought (top pair). The top pair doesn't fit due to the inner foot attachment diameter being too small and the outer foot overall height (that slips into the shaft) is t high as well as the shank height (Screw height of ~1"). Can anyone identify the original machine this may have been badged from? Can anyone tell me where I could purchase presser feet for this machine. I attached a few pics. Thanks in advance for any help! Quote Share this post Link to post Share on other sites
