Members Grizz78 Posted January 6, 2020 Members Report Posted January 6, 2020 I am having issues with my chinese shoe patcher, the thread is balling up under the treadle. I have attached a couple pics to review. I have tried filing the edges and adjusting the thread tension. However, nothing seems to help. Any ideas or thoughts would be appreciated. patch1.jfif patch2.jfif Quote
Moderator Wizcrafts Posted January 6, 2020 Moderator Report Posted January 6, 2020 Either the shuttle timing is way off, or the bobbin tension is too tight, or the top tension is too loose, or the top tension release is opening the tension disks while you sew, or the machine is improperly threaded on top. Of these, I would investigate the bobbin first. Quote
Members Grizz78 Posted January 6, 2020 Author Members Report Posted January 6, 2020 1 hour ago, Wizcrafts said: Either the shuttle timing is way off, or the bobbin tension is too tight, or the top tension is too loose, or the top tension release is opening the tension disks while you sew, or the machine is improperly threaded on top. Of these, I would investigate the bobbin first. I will address each of those tonight and let you know the outcome. Thanks for the input. Quote
Members Journeymen Posted October 6, 2021 Members Report Posted October 6, 2021 Hi Grizz, I started having this problem this morning when I switched to a thicker thread. Did you get it resolved? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.