Moving an Sutton S2000 Finisher?

[Zeego]

Hey everyone. Has anyone had any experience moving one of these suckers? It looks like it would take a minimum of four people to budge the damn thing. Any advice would be appreciated. Thanks! 

[arashikage]

Here's how we moved the last two we bought:
Lift up one end, stick some small pipes (1" - 1.5") under that end. They have to be thick enough that they don't collapse under the weight. They also have to be wider than the machine. Put an appliance cart under the other end. Start pushing. Pull the last pipe and put it back in the front. Continue as needed. Once at the trailer ramp keep the pipe going as far as you can. Then place another hand cart under the front. It takes some finagling but keep the pipes under it once in the trailer so it can be maneuvered as needed. 

[Zeego]

17 minutes ago, arashikage said:

Here's how we moved the last two we bought:
Lift up one end, stick some small pipes (1" - 1.5") under that end. They have to be thick enough that they don't collapse under the weight. They also have to be wider than the machine. Put an appliance cart under the other end. Start pushing. Pull the last pipe and put it back in the front. Continue as needed. Once at the trailer ramp keep the pipe going as far as you can. Then place another hand cart under the front. It takes some finagling but keep the pipes under it once in the trailer so it can be maneuvered as needed. 

Thanks for the suggestion!