Members kuki Posted April 23, 2020 Members Report Posted April 23, 2020 (edited) Hi thereI have a Durkopp 212 - 115155It has:Dogfeed and needle feed.Electronic thread cutter.Electropneumatic presses feed liftsbacktacking equipment.It currently has the original clutch engine and efka vario stop.If these machines any good and are they worth spending money on (i got it cheep)I know some of these motors can be converted to 1 phase, but I would like to have a brushless servo motor on.Is it possible to put a servo motor on with the control box from efka and have in diarams over wires to control the box?Or is it possible to get:Electronic thread cutter.Electropneumatic presses feed liftsbacktacking equipment.to work with another control box and servo motor? for reasonable money?Is it possible to buy paint in the original color for these machines? Bestregards and thanks Edited April 23, 2020 by kuki Quote
Members Constabulary Posted April 23, 2020 Members Report Posted April 23, 2020 (edited) EFKA for sure has something to control these features but expect that it cots way way (way) more than the sewing machine it self. HOHSING also has higher end motors that can control some features but to be honest I never looked this up. https://www.efka.net/en/ http://www.hohsing.com/index.php/en/ I would guess you have to spend approx 1K or so. CS in the UK has EFKA servos: https://www.college-sewing.co.uk/ab321-dc1550-efka-servo-motor.html Edited April 23, 2020 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members kuki Posted April 23, 2020 Author Members Report Posted April 23, 2020 34 minutes ago, Constabulary said: EFKA for sure has something to control these features but expect that it cots way way (way) more than the sewing machine it self. HOHSING also has higher end motors that can control some features but to be honest I never looked this up. https://www.efka.net/en/ http://www.hohsing.com/index.php/en/ I would guess you have to spend approx 1K or so. CS in the UK has EFKA servos: https://www.college-sewing.co.uk/ab321-dc1550-efka-servo-motor.html HiThanks so much for taking the time to respond1K hmm I can see your point.But thank you so much for your links, I will look through them and see if there is a cheap solution. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.