Bluefever Report post Posted May 11, 2020 Can some one who has a swing arm binder mounted on a consew 255rb-3 show a picture? It says should fit in 2 mounting hole to the right side of the needle. That's where the bobbin cover plate is and that plate does not have 2 holes in it. Quote Share this post Link to post Share on other sites
Bluefever Report post Posted May 13, 2020 Any Consew 255rb-3 users out there? Quote Share this post Link to post Share on other sites
Constabulary Report post Posted May 13, 2020 (edited) like this one? https://www.college-sewing.co.uk/226292-swing-guide-singer-111w-211w-211g.html Edited May 13, 2020 by Constabulary Quote Share this post Link to post Share on other sites
Constabulary Report post Posted May 13, 2020 (edited) sorry - wrong track but maybe an optional way for attaching binders there are right side slide plates with a raised part and screw holes for attaching binders but I haven´t seen them for sale recently... If your machine has a front slide pate you may be able to attach binder on this plate as well but it may not work with you current binder or you make a bracket to fit the binder. Maybe you can post some pictures of your machine + binder you want to use EDIT: this is the "raised" / built up plate but w/o holes. https://www.college-sewing.co.uk/240003sp-slide-plate-built-up-111w.html EDIT II: This thread maybe be useful for you Edited May 13, 2020 by Constabulary Quote Share this post Link to post Share on other sites
