Jump to content
Sign in to follow this  

Cylinder Arm Extension Table

Recommended Posts

I am new to the group but found it because I made an extension table for my TechSew 2750. Through my work with other machine owners, I have been able to confirm the designs work on a few other machines so I made a design for the TechSew 4800 and TechSew 2700. 

I have confirmed the table for the TechSew 2750 works on the Cobra Class 26 and Cowboy 341. I have not confirmed if it fits a Juki 341 though (still looking for an owner to test fit the pattern)

TechSew 4800 is the same as the Thor GC-1341. Still looking for a Juki 1340-41-42 owner to test fit the design. 

TechSew 2700 fits the New Tech GC-8B but I am still looking for owners of Cowboy, Consew and Seiko owners to confirm if their machine fits this design.  
After Labor Day, I am going to work with a TechSew 5100 owner (similar to Cobra Class 4 and others) to see if a design can be made. 

If you have a machine that this table many work with, please let me know.

Edited by Luckydays

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...