29k15 Shuttle Rack and base plate DXF files

[29k15engine]

After much work these are the DXF files required to cut correctly profiled shuttle gears for the 29k15 Singer Patcher, although I have extensively tested these on my machine I take no responsibility that these fir yours, they are however ovet 6 month work and are as accurate as i can make.

These can be cut with an EDM wire erosion machine from a suitable steel (Hardened tool Steel)

I will provide side profile drawings for the depth to cut the shuttle gear after the EDM has cut the gear profile.

thickness for pieces before being cut on EDM, surface grind to these sizes,

1. ideal shuttle5-25mmdia.DXF           Description:- pinion gear 6.68mm
2. ideal rack.DXF                                     Description:- rack 3.8mm
3. ideal plate.DXF                                    Description:-Locating plate 2.73mm thick

 

 

ideal shuttle5-25mmdia.DXFFetching info... ideal rack.DXFFetching info... ideal plate.DXFFetching info...

Edited November 27, 2021 by 29k15engine

[29k15engine]

Here are the files in their stl format for 3d printing,

the rack extended for welding is a bit longer to ease welding onto the original or new rack rod.(also in dwx)

ideal plate.STLFetching info... ideal rack extended for welding.DXFFetching info... ideal rack extended for welding.STLFetching info... ideal rack.STLFetching info... ideal shuttle5-25mmdia.STLFetching info...